Designed as a complete microphone setup for location recording in film work and broadcasting, electronic news gathering (ENG), and field production applications with HDSLRs and camcorders, this Kit eliminates the guesswork in configuring a shotgun microphone system that delivers quality, reliability, and low handling noise.Its focused directional characteristics and resistance to structure-borne noise offer sonic results well suited to a variety of production scenarios from independent films and web series to nature shows and documentaries. It has everything necessary for capturing audio for video, film, and sound design applications.
Kit Contents:
1) MKH 416 Mic Kit (00171)
2) Boompole Bag (#00317)
3) Aluminum Cabled 7.5 Boompole (#00164)
4) Shockmount: (#00167)
5) Windmuff ( not labeled)
6) 20 FT XLR (00166)
Shockmount The Auray DUSM-1 Universal Shockmount features a four-point suspension to accommodate shotgun and other cylindrical microphones measuring 0.74-0.98" (19-25mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8"-16 thread connection at the base mounts the shockmount to boompoles and universal handgrips.
Windshield The Auray WSS Series Professional Windshield delivers superior 360° wind protection with acoustic transparency. They are engineered for dramatic reduction of unwanted broadband wind noise and vocal pops with very little high frequency loss, for exceptionally accurate recordings. This WSS-2014 Professional Windshield has an inside depth of 5.5" and is designed for use with many shotgun microphones. It features a specially manufactured open-cell foam matrix surrounded by a layer of 25mm thick simulated rabbit fur. This diffusion technology lowers wind velocity in a controlled air space around the microphone, thereby reducing wind noise without muffling the sound. It also features an airtight tapered rubber base that seals out wind from the rear of the microphone, greatly improving isolation and rear wind protection. When used on a shotgun microphone, this slip-on windshield is effective in minimizing wind noise and plosive sounds. It is most effective in light breeze to strong breeze conditions (4 to 25 mph) and users can generally expect a 24 to 40 dB reduction in wind noise with negligible dampening of high frequencies. For most applications, the negligible high-frequency dampening is a worthwhile exchange for the dramatic wind noise reduction. In addition to superior 360° wind protection, the WSS-2014 helps prevent moisture and dirt from damaging your microphone. The windscreen is designed to fit microphones from Audio-Technica, Neumann, Røde, Sanken, Sennheiser and others.
Boompole The K-Tek KE-89CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP, and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use, while remaining lightweight and travel-worthy. This pole features an internal coiled cable and an XLR connection at the base of the pole. A total of four aluminum sections telescope between 2' 5" to 7' 6" and will easily store in any standard equipment case. The captive-collet coupling system locks each section in place for even further reliability. Internal coiled XLR cable and connection at the base The KE-89CC features a bottom-mounted three-pin XLR connection
